Zoho Lifting Chains FAQ
1. What are Lifting Chains?
Lifting Chains are chains used to lift and move heavy objects. They are usually made of high-strength alloy steel with good tensile strength and wear resistance. Lifting chains are widely used in cranes, hoists and other lifting equipment.
2. What are the main types of Lifting Chains?
The main types of Lifting Chains include:
G80 chain: commonly used for heavy lifting operations, with high strength and wear resistance.
G100 chain: compared with G80 chain, it has higher strength and durability and is suitable for heavier loads.
Stainless steel chain: used in environments that require corrosion protection, such as marine engineering and chemical plants.
Galvanized chain: the surface is galvanized, with good anti-rust performance, suitable for general outdoor environments.
3. How to choose the right Lifting Chains?
The following factors should be considered when choosing Lifting Chains:
Load weight: determine the maximum weight required to be lifted and select a chain with the corresponding rated load.
Working environment: Choose the appropriate chain type according to the actual use environment, such as corrosion-resistant stainless steel chain.
Chain length: Choose the appropriate chain length according to the lifting height and work requirements.
Compliance with standards: Choose chains that meet international or industry standards, such as ISO, ANSI, etc.
4. What are the safety precautions for Lifting Chains?
When using Lifting Chains, the following safety precautions should be followed:
Do not overload: Avoid exceeding the rated load of the chain to prevent chain breakage and equipment damage.
Regular inspection: Check the chain for wear, deformation or breakage before use to ensure that the chain is intact.
Correct connection: Ensure that the chain is firmly connected to the lifting equipment and heavy objects to avoid falling off.
Uniform force: Ensure that the chain is evenly stressed during the lifting process to avoid uneven force on the chain causing breakage.
Environmental safety: Ensure that there are no obstacles around during operation to prevent collisions during the lifting process.
5. What does the maintenance of Lifting Chains include?
Maintenance of Lifting Chains mainly includes:
Regular lubrication: lubricate the chain to reduce friction and wear.
Check wear: check the wear of the chain regularly. If the wear is serious, replace it in time.
Anti-corrosion treatment: For chains used in humid or corrosive environments, anti-corrosion treatment should be performed regularly.
Clean the chain: clean the dust and debris on the chain regularly to keep the chain clean.
Storage conditions: unused chains should be stored in a dry and ventilated place to avoid moisture and corrosion.
6. What are the common faults and treatment methods of Lifting Chains?
Common faults and treatment methods include:
Chain breakage: check whether it is overloaded or unevenly stressed, select a chain with a suitable load and ensure uniform stress.
Chain severe wear: check the use environment and frequency, appropriately increase the frequency of lubrication and maintenance, and replace severely worn chains in time.
Chain deformation: check whether the lifting equipment and chain are connected correctly to ensure that the chain is evenly stressed.
Chain corrosion: For chains used in corrosive environments, increase the frequency of anti-corrosion treatment and inspection.
7. What are the regulations and standards that need to be paid attention to when using lifting chains?
When using lifting chains, the following regulations and standards should be followed:
National and local safety production regulations: Ensure that the use of equipment complies with relevant legal requirements.
Industry standards: Such as ISO, ANSI, ASME, etc., to ensure that the chain design and manufacturing meet international standards.
Manufacturer’s operating manual and maintenance guide: Operate and maintain the chain in accordance with regulations to ensure safety and efficiency.
Zoho Hoist Pre-sales and After-sales Service
Pre-sales Service
1. Product Consultation
Answer customer questions: Provide detailed product information to help customers understand the characteristics and uses of different types of hoists and lifting equipment.
Technical Support: Recommend the most suitable products and solutions according to the specific needs of customers, including recommendations on load capacity, lifting height, working environment, etc.
2. Product Demonstration
On-site demonstration: Arrange professionals to conduct product demonstrations so that customers can intuitively understand the functions and performance of the products.
Online Demonstration: Provide remote video demonstrations and training to facilitate customers to understand the products at any location.
3. Customized Solutions
-Demand Analysis: Provide customized lifting solutions based on the specific needs of customers and working environment.
Solution Design: Design product solutions that meet customer needs, including equipment selection, installation location, operation procedures, etc.
4. Quotation and Contract
Transparent Quotation: Provide detailed product quotations to ensure transparent and fair prices.
Contract signing: After both parties reach an agreement, a formal contract is signed to clarify the rights and obligations of both parties