Morsetto di sollevamento CD con certificato CE
1) Before and after each use, check all parts for abnormal conditions, such as cracks in the welding seam of the clamp body. Deformation of holes or shafts and scratches on rotating parts. Rust and damaged jaws, eccetera.
2) After the label is lost, it should be replaced in time to avoid incorrect use.
3) The wrong storage place should prevent rust and damage to the painted surface of the cross clamp.
4) When not in use for a long time, grease should be applied to all movable parts, and the area parts should be painted.
5) The user is not allowed to change the structure of the vertical clamp at will.
Descrizione del prodotto
Informazioni sul prodotto:
Applicazione:Sollevamento verticale della lamiera d'acciaio.
Intervallo di caricamento:0-12 tonnellata
Per il test viene utilizzato un pezzo di morsetto,e un pezzo o 2 pezzi sono consigliati per operazioni di sollevamento.
Non è possibile sollevare piastre multiple,sollevare solo un pezzo di morsetto una volta. Sollevare la leva di bloccaggio per stringere la molla di bloccaggio quando è sotto carico. Abbassare la leva di bloccaggio per allentare la molla di bloccaggio,quando potresti scaricare.
L'oggetto caricato non deve toccare nulla durante il funzionamento. È vietato caricare eccessivamente. Durante il funzionamento,il sovraccarico è proibito.
Il carico testato è 2 tempi di carico di lavoro.
Con molla di bloccaggio durante la condizione di non lavoro del morsetto,dispositivo di blocco andando in natura step-up,mettere l'oggetto nel morsetto,la forza diventa l'esaltazione delle proporzioni.
Durevole duraturo,funzionamento facile.
Precautions
-Only one steel plate can be lifted by vertical lifting at a time.
-The following situations are prohibited during use.
(1) If there is a serious tilt after lifting the steel plate, the lifting clamp should be re installed.
(2) The steel plate does not reach the bottom of the vertical clamp when the clamp is installed, so that only part of the steel plate is stuck by the vertical clamp after lifting the steel plate.
-During the lifting process, the steel plate that is forbidden to be lifted is subject to collision and impact.
-The lifting process should be as stable as possible, and it is strictly forbidden to stand underneath or pass over objects.
-The surface hardness of the suspended steel plate shall not be greater than HB220. Vertical clamps are not suitable for hoisting stainless steel plates. 10) No oil stains are allowed on the surface of the hoisted part of the steel plate.
scrapped
When one of the following situations occurs, the parts should be replaced or scrapped
1) When the wear height of the jaws and the support platform reaches 10% of the original height;
2) When two teeth are chipped or broken;
3) When the wear of the clamp shaft reaches 25% of the original diameter;
4) When the pliers shaft or pliers body deforms to 1.5% of the original size;
5) The overall movement of the horizontal clamp is not flexible, and it is still not flexible after adding lubricating oil to each sliding part.