الأسئلة الشائعة حول سلاسل الرفع الخاصة بـ Zoho

The main types of Lifting Chains include:
G80 chain: commonly used for heavy lifting operations, مع قوة عالية ومقاومة التآكل.
G100 chain: compared with G80 chain, it has higher strength and durability and is suitable for heavier loads.
Stainless steel chain: used in environments that require corrosion protection, such as marine engineering and chemical plants.
Galvanized chain: the surface is galvanized, with good anti-rust performance, suitable for general outdoor environments.

The following factors should be considered when choosing Lifting Chains:
Load weight: determine the maximum weight required to be lifted and select a chain with the corresponding rated load.
بيئة العمل: Choose the appropriate chain type according to the actual use environment, such as corrosion-resistant stainless steel chain.
Chain length: Choose the appropriate chain length according to the lifting height and work requirements.
Compliance with standards: Choose chains that meet international or industry standards, مثل ايزو, أنسي, إلخ.

When using Lifting Chains, وينبغي اتباع احتياطات السلامة التالية:

لا تفرط: Avoid exceeding the rated load of the chain to prevent chain breakage and equipment damage.
التفتيش المنتظم: Check the chain for wear, deformation or breakage before use to ensure that the chain is intact.
Correct connection: Ensure that the chain is firmly connected to the lifting equipment and heavy objects to avoid falling off.
Uniform force: Ensure that the chain is evenly stressed during the lifting process to avoid uneven force on the chain causing breakage.
Environmental safety: Ensure that there are no obstacles around during operation to prevent collisions during the lifting process.

Maintenance of Lifting Chains mainly includes:
التشحيم المنتظم: lubricate the chain to reduce friction and wear.
تحقق من التآكل: check the wear of the chain regularly. If the wear is serious, replace it in time.
Anti-corrosion treatment: For chains used in humid or corrosive environments, anti-corrosion treatment should be performed regularly.
Clean the chain: clean the dust and debris on the chain regularly to keep the chain clean.
Storage conditions: unused chains should be stored in a dry and ventilated place to avoid moisture and corrosion.

وتشمل الأخطاء الشائعة وطرق العلاج:
Chain breakage: check whether it is overloaded or unevenly stressed, select a chain with a suitable load and ensure uniform stress.
Chain severe wear: check the use environment and frequency, appropriately increase the frequency of lubrication and maintenance, and replace severely worn chains in time.
Chain deformation: check whether the lifting equipment and chain are connected correctly to ensure that the chain is evenly stressed.
Chain corrosion: For chains used in corrosive environments, increase the frequency of anti-corrosion treatment and inspection.

When using lifting chains, وينبغي اتباع اللوائح والمعايير التالية:
لوائح إنتاج السلامة الوطنية والمحلية: التأكد من أن استخدام المعدات يتوافق مع المتطلبات القانونية ذات الصلة.
معايير الصناعة: مثل ايزو, أنسي, ASME, إلخ., to ensure that the chain design and manufacturing meet international standards.
دليل التشغيل ودليل الصيانة الخاص بالشركة المصنعة: Operate and maintain the chain in accordance with regulations to ensure safety and efficiency.